WARNINGS
·
Connect the air conditioner to its own power socket protected by a thermal-magnetic safety switch suited to the electrical
input of the appliance.
·
When the air conditioner starts or stops, especially during heating, unusual creaking sounds may be heard. This is
caused by the thermal expansion of the unit parts.
·
Mist may sometimes be produced by the Indoor Unit for a few seconds during cooling. This is caused by the difference in
temperature between the air produced and the air in the room. This phenomenon is quite normal.
·
Do not place heat sources near to the air conditioner as this could deform the parts made of plastic.
·
Do not insert objects into the air intakes or outlets when the air conditioner is in operation.
·
Do not place objects in a position which may obstruct the passage of air into the indoor or outdoor units as this may affect
the performance of the air conditioner.
·
Do not open or close doors and windows too often. Constant exchange of heat with the outside interferes with the
working of the air conditioner.
·
Do not set a temperature which is too high (in heating mode) or too low (in cooling mode).
·
Do not expose the appliance to direct sunlight.
·
Use the “Timer” for the timed switching on of the appliance, to avoid the air conditioner operating needlessly while you
are out of the house.
·
Use the “SLEEP” function during the night.
AIR CONDITIONER CLEANING
·
Turn off the automatic circuit-breaker before carrying out any cleaning operations.
·
Use a cloth dampened with warm water (max. 40°C) and mild detergent to clean the Indoor Unit. Do not use
solvents or harsh detergents.
·
If the Outdoor Unit battery is blocked, remove the leaves and deposits and then the dust using a jet of air or a
little water.
OPENING OF THE INDOOR UNIT PANEL
To open the grille turn by 90° (1/4 of a turn) the plastic
screws present on the grille (fig.1) and pull the panel
gently downwards without forcing the hinges that fasten
it to the machine.
The open machine will appear as shown on picture 2.
Attention: to make cleaning easier, it is possible to
remove the grille completely as the receiving panel is
situated on the fixed frame of the unit.
User’s Instructions