33
c. Sleep 3
Sleep curve setting under Sleep 3(DIY mode)
d.
Under the mode of Sleep 3, press Timer to enter the Sleep setting. In this case, “1 HOUR” is displayed
where the timing value once is displayed and the corresponding temperature with the last Sleep curve setting
is displayed where the ambient/preset temperature once in displayed.
e.
Press
or
to change the corresponding temperature setting.
f.
Press Timer, time will automatically increase by 1hr, and the corresponding temperature with the last
Sleep curve setting is displayed where the ambient/preset temperature once is displayed.
g.
Repeat step 2 and step 3 till 8 HOUR Sleep setting is finished.
h.
Press Enter/cancel to confirm the setting.
Sleep curve setting under Sleep 3 is as shown in Fig.13.
Fig. 13 Sleep Curve Setting under Sleep 3
Notes:
1) During the above setting, if Function is pressed down or there is not any operation within 5s, sleep
curve setting will be canceled.
2) 26°C is the default Sleep curve temperature before delivery. The wired controller will automatically
memorize the Sleep curve after the setting.
®
®
®
®
®
®
User’s Instructions
