5
►
Safety advice
This device is intended to be used only for its specific use.
The manufacturer disclaims any liability for damage caused by abnormal use or abuse.
Children 8 years of age or older and persons with reduced physical, mental or sensory abilities, or lack of
experience and skill may use this device, if supervised by a qualified person, or they have received the
instructions for use and security necessary to understand the risks involved.
Supervise children to make sure they do not play with the appliance and they can’t make the cleaning &
maintenance of the machine.
Do not leave the packaging elements within reach of children. These elements are potentially a source of
danger.
The installation must be done by a qualified technician and following local and national regulations. He is
the only one to be authorized to access the internal parts of the device for maintenance and repair.
Use only the technical and spare parts manuals for proper functioning of the machine, and avoid compromising
safety.
Access to the service area is limited to persons with the necessary knowledge of safety and hygiene as well
as practical experience of the device.
Leave enough free space around the machine to facilitate its use and to preform any maintenance operations.
The device
must not be
:
- exposed to the elements of the external environment or placed in damp places,
- exposed to a water jet or splashing.
- installed in areas where the jets or high pressure cleaners are used.
The device
must be
:
- placed on a stable, level and horizontal surface
- used at an ambient temperature of 5°C to 35°C (41°F - 95°F), (if it is stored at an ambient temperature
below 5°C (41°F) the water circuit (boiler-piping) must be drained.)
- if the device freezes, wait 24 hours at a minimum temperature of 10°C (50°F) before restarting the device.
Before connecting the power and water supplies, check that the electrical and water network are in
accordance with the technical information plate of the device.
The power supply must be provided with the following safety features: power switch which completely
isolates the machine from the mains (gap between contacts of at least 3 mm), efficient earthing and an
effective circuit breaker for protection against earthing leaks; section of the conductors appropriate for a
power capacity.
Before connecting or disconnecting the power cable, switch the main switch onto position 0. If the power
supply cable is damaged, it must be replaced by the manufacturer, by its after-sales service technician or
similarly qualified persons, to avoid any danger.
For electrical safety, make sure that the device is properly earthed.
The manufacturer disclaims any liability for damage caused by improper earthing.
The device must be connected to a water network with a pressure of 1 to 8 bar (0.1 to 0.8 MPa) and a tap
readily accessible must be fitted in front of the water supply tube. The device is to be installed with adequate
backflow protection to comply with applicable federal state and local codes.
In case of emergency (fire, surge, abnormal noise, etc. the first thing to do is to cut off the current and close
the water tap.
Be careful not to obstruct the air inlets of the machine with towels or other objects.
Beware of hot surfaces such as cup heaters, the unit heads and the hot water and steam outputs.
Never install containers filled with liquid on the top of the machine.
Beware of jets of hot water or steam.
The machine should be descaled only by a qualified technician.
Содержание AURA 2GR
Страница 2: ......
