44
Network Setup
How to use > Press
MENU→ ‘Setup’ → ‘System’ → ‘Network’
UNIBOX HD ECO+ is integrated with standard 10/100Mbps Ethernet with RJ 45 connector standard. You are
recommended to use this network capability of UNIBOX HD ECO+ to fully enjoy the system. You can setup the
network settings through this Network Configuration menu.
In the Network Configuration menu, you will see five sub menus as follows:
①
Adapter settings: Through this menu, you can set the basic Ethernet configuration.
User Interface: YES is used to activate the Ethernet. If you set this option at NO, the Ethernet will not work.
Use DHCP: YES is used to use DHCP (Dynamic Host Configuration Protocol). If you set this option at YES, it
will automatically detect the correct IP address. NO is used when you want to use a certain fixed IP address.
In this case, you need to enter correct addresses in each field.
