12
3.2 Connecting Power
A power code is provided as one of the basic accessories of UNIBOX HD ECO+.
● Connect the power cord to the connector at the rear panel of UNIBOX HD ECO+.
● Connect the power cord to a power outlet.
● Turn on the power switch at the rear panel.
NOTE: AC input condition
● Nominal Voltage Range: 100~240 VAC
● Maximum Vol
tage Range: 90~264 VAC
● Nominal Frequency: 50/60 Hz
● Maximum Frequency Range: 47~63 Hz
3.3 Power ON/OFF
[Press POWER ‘Standby/Restart’]
There are several ways to turn your UNIBOX HD ECO+ ON or OFF
● Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off each time. It takes a
longer time to boot the system if you turned it off by this switch.
● Standby Mode
POWER key is normally used to turn the power of UNIBOX HD ECO+ on or off. If you press POWER, it instantly
switches your UNIBOX HD ECO+ off or on. In this mode, the system is not completely shut down and thus it takes a
shorter time to turn it on and off.
● Deep Standby Mode
Deep Standby is used to reduce the standby power consumption. UNIBOX HD ECO+ is designed to
be energy efficient and to guarantee the power consumption to be under 1W in the deep standby mode.
