Maintenance
25
Fig 32
13. Snap Fit Divider Seal
Align the divider seal and insertion tool as
shown.
Fig 33
14. Position the new seal into the bore and using
the insertion tool T-020, apply a sharp tap
with a light mallet or similar, ensuring that the
seal is held central and square to the body.
Fig 34
15. Divider seal should ‘snap’ into position. The
raised edges of the seal must be checked to
ensure that they have engaged fully and
correctly on the body faces. Insertion tool is
designed to stop the seal being pushed too
far.
www.unibloctech.co
m
