Uniblitz VincentAssociates VED24, Инструкция по эксплуатации

Страница: 27 / 35

VED24 User Manual 26
Maintenance
Proper care and maintenance of the unit should be taken as with any electronic instrument.
With the exception of the external DC power supply, there are no user-serviceable parts in the
VED24 .
There is no service to be performed by the user other than inspection for visible damage.
Although the stability of the timing and drive voltage is assured and calibrated prior to shipment,
it may become necessary to make some minor adjustments and upgrades to the firmware of the
VED24 over time.
General Care
Perform routine inspection of the VED24 on a regular basis.
Inspect the unit for any signs of visible damage.
Follow the procedures below.
Inspection
Inspect the VED24 for damage, wear, and missing parts. A device that appears to have been
dropped or shows other signs of exterior damage should be checked thoroughly to verify correct
operation and performance. If damage is suspected, please return the unit to the factory for
repair – there are no user-serviceable parts.
Cleaning Procedure
Remove loose dust on the VED24 with a low pressure stream of compressed (canned) air.
WARNING
It is highly recommended that if you suspect a problem with your
unit, that it be returned to the factory for proper adjustments and
calibration. The unit's complicated circuitry will be damaged and/or
not function as specified if inadvertently adjusted improperly.
CAUTION
Do not use any liquid to attempt to remove dust from the unit.