USF-1600 User Manual
- page 9 -
K
– 141
Explanation:
Permissible speed of the tractor PTO shaft
(in the version with a hydraulic pump driven
by a PTO shaft.)
`
^
`
`
`
WOM włączać tylko przy małej prędkości obrotowej
silnika.
Engage pto - shaft only at low engine speed.
Zapfwelle nur bei niedriger Motordrehzahl
einkuppeln.
La prise de force ne doit etre enclenchee qu’a regime
moteur reduit.
Aftakas alleen bij laag motortoerental inkoppelen.
K-265
6. GENERAL AND COMMERCIAL INFORMATION. REPAIR DURING THE WARRANTY PERIOD.
In case of any problems or doubts with the maintenance and operation, please contact the authorized vendor
or the manufacturer’s Sales Department. The vendor is obliged to enter the tasks performed during the warranty
period into the warranty card.
Read the User Manual thoroughly before starting the machine for the first time
and follow the safety instructions contained in it!
The machine is only intended for generally accepted use, i.e. for sowing seeds and spreading fertilizers,
as indicated in the User Manual (see sowing chart). In the case of sowing seeds other than those indicated in the
instructions, contact the manufacturer in order to determine, if the machine can be used for this purpose. The
usage other than in compliance with the above-mentioned method is treated as incompatible with the intended
use. The manufacturer is not liable for damages resulting from such usage, only the user bears the risk.
Intended use also includes compliance with the conditions of use and maintenance of the machine in
good condition and using only genuine spare parts specified by the manufacturer.
The seeder may only be used, maintained and kept in a proper condition by people familiar with its
maintenance and informed about the hazards.
It is also necessary to comply with relevant accident prevention regulations and other generally accepted
rules in the field of technical safety, occupational medicine and traffic regulations.
The nameplate is located on the frame, at the front of the machine.
