UNI-T UTG1000X Series, Руководство пользователя

Страница: 58 / 74

User’s Manual UTG1000X Series
Instruments.uni-trend.com
58 / 74
Table 4-3
Carrier Wave
Frequency
UTG1042X UTG1022X/-PA
Minimum Value Maximum Value Minimum Value Maximum Value
Sine Wave 1 μHz 40 MHz 1 μHz 20 MHz
Square Wave 1 μHz 20 MHz 1 μHz 10 MHz
Ramp Wave 1 μHz 1 MHz 1 μHz 400 kHz
Pulse wave 1 μHz 20 MHz 1 μHz 10 MHz
Arbitrary
Wave
1 μHz 10 MHz 1 μHz 5 MHz
If the frequency of the wave need to be set, please select the wave at first, and then use multifunction rotary
knob or press soft key
Freq
to set the frequency, use numerical keyboard to input number and select unit
soft key to complete the setting.
4.3.2
Pulse String Type
UTG1000X can output three types of pulse train, N cycle, gating and infinite. The default type is N cycle.
1)
N Cycle Mode
Press NCycle to enter N cycle mode, the waveform generator will output a waveform with designated cycle
number (pulse string). After output a designated number cycle number, the waveform generator will stop
and wait for the next trigger. The trigger source of pulse string can be internal or external in this mode. It
can be change by multifunction rotary knob and arrow keys or press soft key
TrigSrc
to complete the
setting (as shown in the following figure).
2)
Gating Mode
Press
Gate
to enter gating mode, the trigger source, trigger edge, burst and cycle number options in the
parameter list will be automatically hidden. So it can only use the external trigger source, the waveform