UNI-T UTE9802+ Скачать руководство пользователя страница 3

Страница: 3 / 34

User’s Manual Smart Digital Power Meter

Instruments.uni-trend.com

c) Any damage or malfunction caused by the use of a power source which does not conform to the

requirements of this manual.

d) Any maintenance on altered or integrated products (if such alteration or integration leads to an increase

in time or difficulty of product maintenance).

This warranty is written by UNI-T for this product, and it is used to substitute any other express or implied
warranties. UNI-T and its distributors do not offer any implied warranties for merchant ability or applicability
purposes.

For  violation  of  this  guarantee,  regardless  of  whether  UNI-T  and  its  distributors  are  informed  that  any
indirect,  special,  incidental,  or  consequential  damage  may  occur,  UNI-T  and  its  distributors  shall  not  be
responsible for any of the damages.

Safety Instructions

To avoid possible electric shock and personal safety problem, please follow the instructions below. Uni-

Trend will not be responsible for the personal safety and property damage caused by the user's failure to

comply with the following terms.

1. Do not use the damaged instrument. Before using, please check the outer shell whether has crack or plastic

lack. Do not use the instrument in flammable and explosive gas, steam or dusty environment.

2. Only trained personnel can execute maintain procedure to avoid fire and personal injury; there must be

personnel supervision in use, otherwise it should be turned off the instrument and its power supply.

3. Before connecting the instrument, observe all marks on the instrument to learn more about the rated value,

warnings and notices.

4. The power supply of the instrument is 100-240VAC, 50/60Hz.

5. The instrument is equipped with three core power cord, only use the power cord provided by the

manufacturer to avoid accidental injury; do not plug and unplug the power cord when the instrument is

energizing; do not put other objects on the power cable when using it, and ensure that the power cable is

away from heat source.

6. Instrument grounding

：

To prevent the risk of electric shock, please connect the power ground wire.

7. Do not install substitutes or perform unauthorized changes; do not use the instrument when the outer shell

opened or looseness.

8. During the test, do not touch terminal blocks and test line to prevent from electric shock; do not plug the

communication port; do not put article on the instrument to protect the instrument, especially pay

attention not to let metal chips, water, oil and other liquids into the internal the interior of the instrument,

Содержание UTE9802+



































Результаты поиска

Содержание UTE9802+

Отзывы:

Похожие инструкции для UTE9802+

Бренды по названию

Популярные бренды

UNI-T UTE9802+, Руководство пользователя

Результаты поиска

Содержание UTE9802+

Отзывы:

Похожие инструкции для UTE9802+

Бренды по названию

Популярные бренды