UNI-T UT70D, Руководство по эксплуатации, Страница: 15 / 48

1. Press RANGE.
The Meter enters the manual range mode and
turns off.
Each presses of
RANGE increments the range.
When the highest range is reached, the Meter wraps
to the lowest range.
2. To exit the manual range mode, press and hold
RANGE for over 1 seconds.
The Meter returns to the autorange mode and
is displayed.
Note
In Hold, Max/Min mode, Press RANGE exits these
measurement modes and enters manual range mode.
In Hz measurement mode, Press
RANGE to
attenuate 10 times of input signal amplitude which
can increase the Meter sensitivity and stabilize the
correct reading.
Press RANGE while turning on the power to enter
80,000 counts resolution except at capacitance
measurement.
Measurement Ranges(2)