UNI-T UT60D, Руководство по эксплуатации

Страница: 19 / 42

B. Measuring Continuity, Diodes & Resistance
Warning
To avoid damages to the Meter or to the devices
under test, disconnect circuit power and discharge
all the high-voltage capacitors before measuring
continuity, diodes & resistance.
Testing for Continuity
(see figure 5)
Measurement Operation (3)
To test for continuity, connect the Meter as below:
1. Insert the red test lead into the HzV terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to and press BLUE
button to select measurement mode.
3. The buzzer sounds if the resistance of a circuit under
test is less than 50
.
Note
l
The LCD displays indicating the circuit being
tested is open.
l
When continuity testing has been completed,
disconnect the connection between the testing leads
and the circuit under test.
(figure 5)
W
black red
Model UT60D: OPERATING MANUAL
19