UNI-T UT381, Инструкция по эксплуатации

Страница: 14 / 22

14 13
UT381/382 Instruction Manual
UT381/382 Instruction Manual
factory defaults.
● After restoring to factory defaults, the defaulting state of the system is: USB.0
(no USB transmission); APO1 (auto power off); 60S (auto record interval is
set up as 60s); clearing all data records.
5.USB data transmission function: (only for UT382, see Figure 4)
● Long press “MENU” to enter USB transmission setting, and “USB.0” or
“USB.1” will be displayed on LCD; USB.0 means that data can’t be
transmitted; “USB.1” means that data can be transmitted; press “RANGE/+”
or “MAX/MIN/-” key to switch between “USB.0” and “USB.1”.
● Each time, after the system is power on, the USB function of the luminometer
is set as “USB.0” (no data transmission state) automatically.
● The communication between luminometer (UT382) and PC is realized
by USB data transmission, thus PC must have USB port, see Picture 4 for
luminometer and PC connection.
● When connecting UT382 to the computer, it cannot operate any functional
buttons during transmission.