UNI-T UT381, Инструкция по эксплуатации

Страница: 12 / 22

12 11
UT381/382 Instruction Manual
UT381/382 Instruction Manual
short press it to select SECREC interface, while the auto memory interval is
displayed on the main display; press “RANGE/+” or “MAX/MIN/-” key to adjust
the auto memory interval displayed on the main display; press “MENU” key to
enter next function setting or press “HOLD” to exit function setting. And
luminometer will save the updated settings.
● Long press “REC/ERASE” to save data automatically, and “REC” sign
displayed on LCD SECREC flashes, and the luminometer will save the
measured data according to the current auto saving interval setting; if the
storage space of luminometer is fully taken up, the system will exit auto
memory; and “FULL” sign will be displayed on LCD; press “REC/ERASE” key
to exit auto data memory function.
● Manual data memory: in the normal measurement state, press “REC/ERASE”
once to save one measured data, and “REC” sign displayed on LCD
SECREC flashes once.
● When 2044 pieces of data is fully recorded, “FULL” sign will be displayed on
LCD, and no data can be saved at this moment. When the saved data is
above 2044 pieces
● Under power-off state, press “REC/ERASE” and power on meanwhile, when
“CLR” sign is displayed on LCD, all saved data will be cleared.