Range switching
Fully automatic
Sampling rate
3 times per second
Data storage
Store 3000 groups of data. Press “
ۆ
” to hold data and perform
automatic numbering and data storage (data loss does not
occur if power is down or battery is replaced).
Data hold
Press “
ۆ
” to hold data (with the symbol “HOLD” displayed), then
press HOLD to disable data hold.
Data viewing
Press “
ڼ
” to enter data viewing mode.
Overload indication
The symbol “OL” appears
No-signal indication
The tester indicates “No signal” if no transmission signal is
received.
Auto power off
The product powers off automatically 15 minutes after it is
powered on.
Battery voltage
If the battery voltage is lower than 4.8V, the symbol “
”
appears to indicate replacing battery.
Transmission distance of
primary clamp sensor
100M (wireless transmission)
Data transfer
USB
Connecting wire of
secondary clamp sensor
2M
Display mode
LCD: 128dots × 64dots (Designed with backlight function,
suitable for use in dark environments)
LCD size
Display domain: 44mm × 27mm
Tester dimensions
78mm × 165mm ×42mm
Product weight
5kg (including carrying bag and insulation stick)
External interference
Avoid extra strong electromagnetic field; avoid co-channel
interference of frequency at 433MHz and 315MHz.
Operating temperature and
humidity
-15°C~50°C;
70%Rh
Storage temperature and
humidity
-10°C~60°C;
70%Rh
Size of insulation stick
32mm; 1m/piece (including 5 pieces)
Withstand voltage of
insulation stick
110KV
Dielectric strength
Tester and clamp sensor: AC 1000V/rms (between casing and
screw)
3
