Red
Black
G. Model UT206A: Temperature Measurement
(See figure 8)
1. Insert the red temperature probe into the
o
C
terminal
and the black temperature probe into the
COM
terminal.
2. Set the rotary switch to
o
C
.
3. Place the temperature probe to the object being
measured.
The measured value shows on the display.
(figure 8)
To measure temperature, connect the Meter as follows:
When there is no temperature probe inserted into the
terminals, the LCD displays
OL
.
The included point contact temperature probe can only
Note
be used up to 250
o
C. For any measurement higher than that, it is necessary to
use another type of temperature probe.
When temperature measurement has been completed, disconnect the connection
between the testing leads and the circuit under test, and remove the testing leads
away from the input terminals of the Meter.
Model UT205A/206A: OPERATING MANUAL
27
