B.
DC Voltage Measurement
(See figure 4)
(figure 4)
Warning
To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 600V although
readings may be obtained.
To measure DC voltage, connect the Meter as follows:
1. Insert the red test lead into the
V
terminal and the
black test lead into the
COM
terminal.
2. Set the rotary switch to DC voltage measurement
mode.
Red
Black
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model UT205A/206A: OPERATING MANUAL
19
