4
•
Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•
Do not overreach, use both hands.
•
Never work under the influence of alcohol or other drugs.
•
Do not use the machine/tool if you feel dizzy or week.
•
Any modifications or improvements to the machine are strictly prohibited. DO NOT USE if you discover
bent part, crack or other damage to your machine.
•
Never perform any maintenance during operation.
•
If you see any unusual sign or hear any strange sound, switch of the machine immediately.
•
Do not forget to remove all wrenches and/or screwdrivers from the machine.
•
Before use, make sure all screws are tightened securely.
•
Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
•
Use only original spare parts during repairs.
•
Using accessories or extension pieces not approved by the manufacturer may cause injuries.
•
Use this machine only for work that could be handled by it. Do not overload tools, accessories or the
machine. For large work volume use more powerful machine.
•
Do not overload the machine. Measure the work load in such way, so it could be done with comfortable
speed. Damages due to machine overload are not covered by the warranty policy.
•
Do not expose to extremely high temperature or direct sunlight.
•
This machine is not designed for use in humid environments or under water.
•
If you are not using your equipment, store it in a dry and locked place, out of reach of children.
•
Before switching your machine on, make sure that all safety elements work as designed. Make sure all
moving parts are in good working conditions.
•
Inspect all parts for cracks and damages. Make sure movable parts are not stuck and set properly.
Also take into consideration other conditions that may have a negative effect on the proper function of
your machine.
•
If not stated otherwise in this manual, all damaged parts and safety elements must be repaired
or changed.
Fine mechanics
•
Never use a vise to hold you device.
•
Protect your machine from fall and impact.
Assembly
•
Do not use the machine unless completely assembled.
Electrical equipment
•
Observe all basic safety rules when using electrical equipment to prevent risk of fire, injuries by electrical
shock and other hazards. Before using this device, read this manual entirely and follow all safety
instructions.
•
Make sure the power cable plug is plugged into the correct wall outlet. The voltage in the wall outlet must
be the same as shown on the specification label to prevent damage to the electric motor. Too low voltage
will not provide your machine with enough power.
9
???
PART LISTING
1.
Right decorative cover
2.
Right cover
3.
Spindle spring
4.
Cable core
5.
Positioning ball
6.
Cable
7.
Cable fastening clamp
8.
Self-locking jaw
9.
Pull spring
10.
Dielectric piece
11.
Brass ring
12.
Middle cable axis
13.
Brass plug
17.
Middle cable axis cover
18.
Supporting seat
19.
Foldable seat
20.
Console
21.
Left decorative cover
22.
Cable
23.
Left cover
24.
House guiding seat
25.
Hose guiding support
26.
Hose guiding support
27.
Bushing
