Unex VTX-301, Быстрый старт

Страница: 7 / 11

Doc. No: Unex-HDG-20-001
7/11
A printed version of this document is an uncontrolled copy
© 2020 Unex Technology Corporation – Company Confidential
7. I/O Interfaces
7.1. Antenna Interfaces
7.1.1. Connectors
The VTX-301 provides two
50 Ω RF connectors. Receptacle connectors are compatible
with I-PEX MHF I 20279-001E-03 or HIROSE U.FL-R-SMT-1(10) . For more information
about mating connectors, visit the website https://www.i-pex.com/Products/detail/129 or
http://www.hirose-connectors.com/ for more detail.
Figure 3: Antenna connectors
The antenna connection is one of the most important aspect in the full product design
as it strongly affects the RF performance. Connecting cables between the module and the
antenna must have 50 Ω impedance. If the impedance of the module is mismatched, RF
performance will be reduced significantly.
Please be careful when extracting the antenna cable from the VTX-301. Extracting the
connector by pulling the cable may cause damage on the antenna plug assembly. It is
recommended to extract the cable using extraction tool like I-PEX 90192-001 or HIROSE
U.FL-LP-N-2 .
V2X0 ANT
MHF I,
50 Ω
V2X1 ANT
MHF I,
50 Ω