Tracker
2
Assembly & Operating Instructions
7
Stopper
Figure 7-1
Attention: The hose should not stay under water pressure after the unit has shut down for
an extended period of time. The water supply is to be closed and any remaining water
pressure relieved prior to opening the quick closing valve. Confirm the pull cable has been
release per instruction #6.
Winterization
It is recommended to “winterize” the Tracker
2
when stored in freezing climates. Drain any excess water
that might have collected within the machine using compressed air. This can be accomplished by
temporarily removing the impact sprinkler and blowing air back through the hose inlet port.
Then clean and lubricate wheel axles, cable drum, pull cable locking mechanism and winder handle
connection into the main body of the machine.
Specifications
Product Dimensions
Length
32 1-/2”
(
0,83m)
Width
18”
(
0,46m)
Overall Height w/ Sprinkler
20”
(0,51m)
Overall Height w/o Sprinkler
14”
(0,35m)
Maximum Working Pressure
116 Psi
(8,0 bar)
Minimum Working Pressure
50 Psi
(3,5 bar)
Weight w/o Shipping Carton
81 lbs.
(36,7 kg)
Maximum Radius @ 116 Psi
62’
(18,6m)
Travel Speed
33 ft/h
(10m/h)
Application Rate
1/8-13/32”/hr.
(3-10mm/hr.)
!
