Underground Magnetics Mag 6 Series, Быстрый старт

Страница: 4 / 11

Page 3
1. Install batteries into the transmitter positive side
down and install the battery cap with the provided
battery cap tool.
It is recommended that a double C lithium cell
battery be used if operating in adverse soil
conditions (like rock). This will prevent battery
chatter, which can greatly reduce the life of
normal C cell batteries. One double C lithium
cell battery is included in your Mag System.
2. Turn on receiver by holding the power button
down until the Mag logo is visible on the screen.
Once the receiver is on, the screen will display the
information being sent from the transmitter.
The transmitter model, frequency and power
level will be in the lower left hand of the
screen.
The distance from receiver to transmitter,
transmitter temperature, transmitter signal
strength, and signal to noise ratio will be
displayed across the top of the screen.
Manual page 10