Underground Magnetics Mag 6 Series, Быстрый старт

Страница: 2 / 11

Page 1
Thank you for purchasing your Mag System
!
This Quick Start Guide will walk you through the process
of starting your new system and preparing to drill. Please
read this over and if you have any questions contact our
customer service at
515-505-0960 .
When you receive your Mag 3S or 6S system:
The receiver and transmitter will be paired and
ready to drill.
The transmitter has been unlocked, preprogramed
at 19 kHz, and calibrated with the receiver at the
factory.
Always check calibration
before drilling.
The receiver and display have been paired and are
set to channel 1.
System
Manual page 14
Manual page X
Note: This question mark and
textbox tells you the page
in the
Operator’s Manual
where you can find more
detailed information on the
corresponding topic.