3. How to use
[ Charging ]
UBC-100
comes with a built-in rechargeable battery. Ensure that your
UBC-100
is fully charged before first use.
(1) Pl
th Mi
USB 5 i
t
f th
h
i
bl
th
i
j k d t
i t th
h
i
t l
t d
(1) Plug the Micro USB 5-pin connector of the charging cable or the cigar jack adapter into the charging port located
on the side of
UBC-100
.
(2) With USB charging cable, You can charge
UBC-100
directly from your PC or MAC by plugging the USB end of the
charging cable into a USB port in your personal computer
charging cable into a USB port in your personal computer.
(2’) With Cigar jack adapter(An optional item), Plug the cigar jack of the adapter into a car outlet.
Please make sure that the computer or the car is powered on.
(3) While charging, the RED LED light(
) will be turned on and remain lit until
UBC-100
is fully charged.
Tip
Tip
(3) While charging, the RED LED light( ) will be turned on and remain lit until
UBC 100
is fully charged.
(4) When charging is complete, the RED LED light will be turned off.
(5) Unplug
UBC-100
from the charging cable or the cigar jack adapter.
(It takes about 2 hours to charge a fully depleted battery of
UBC-100
)
(It takes about 2 hours to charge a fully depleted battery of
UBC 100
)
(1)
(2)
(2’)
(3,4)
[ LOW Battery ]
Charging
Complete
[
y ]
When the battery is nearly depleted in either active or standby mode.
(1)
UBC-100
will make a beep sound once every 60 seconds and
(2) the RED LED light( ) will flash once every 4 seconds.
