3. How to use
[ MIC mute ]
(
Long Key)
In order to turn MIC off, press both (Volume up) and (Volume down) button for 1.5 seconds until you hear the
beep sound twice and release it.
Reversely in order to turn MIC on, press both (Volume up) and (Volume down) button for 1.5 seconds until you
hear the beep sound twice and release it.
[ Auto reconnecting ]
[ Auto reconnecting ]
UBC-100
and your mobile phone will be disconnected (Link-Lost) each other at the moment when the distance
between
UBC-100
and the mobile phone is above the operation range, 10 meters (33 feet).
When both devices come close within the range
UBC 100
and the mobile phone will be auto reconnected each
When both devices come close within the range,
UBC-100
and the mobile phone will be auto-reconnected each
other, however, for the activation of the auto reconnecting function, they must be brought back in that range within
16 hours. After 16 hours (around 960 minutes) out of the operation range,
UBC-100
will be automatically turned
off by itself.
y
From the moment when
UBC-100
and your mobile phone are not in operation range, which means both
devices are link-lost each other
UBC-100
will seek your mobile phone as emitting signals to reconnect
Note
Note
with the mobile phone.
UBC-100
emits the signal at 3-minute intervals for 120 minutes(2 hours) and then at
4-minute 20 seconds intervals for 840 minutes.
In order to use the auto reconnecting function, an initial pairing between both devices must be done before.
