CLASSFICATION
.
Installation Manual
MODEL
.
ENB-X1
DOCUMENT NO
.
BU No. 10
Hyundai Accent In-Dash Navigation DIY Installation Guide
VERSION
1.2
PAGE
19
Information & Manual
Copyright © 2012 UNAVI USA, Inc. All rights reserved.
Date: 4/18/2012
Route the SD/USB interface cable around from behind the
glove box and out through the center dash panel opening.
Use Unibit to drill a hole on the back of the glove box (about 3/4-inch) just wide
enough for the SD/USB interface cables to slide through.
**Proceed with Caution**
