Page | 10
The Kanega watch battery charger can only charge the official Kanega batteries that are
supplied with your watch.
5 BATTERIES
Your Kanega watch is supplied with four (4) Lithium Ion batteries.
Requirements
The watch requires two (2) official
Kanega batteries to operate. The watch has an
internal battery for emergencies only. The internal battery is inside the watch and not intended
for day-to-day operation. You must always have two charged batteries on your watch.
Battery Life
Under normal conditions your batteries last 24-36 hours. Best practice is to proactively change
your batteries nightly.
The batteries may need frequent charging the first few times of use because they are also
charging the internal backup battery inside the watch. Once the internal battery is charged, your
batteries will last longer. The first time you set up the watch, you may need to change your
batteries ever 4-6 hours until the internal battery is full charged. Try not to allow your watch
batteries to discharge to zero, as this results in reduced performance of your batteries.
Battery life varies based on activity, screen brightness, and Wi-Fi or cellular usage.
Changing batteries on the watch band
When changing batteries on your watch, remove one (1) and replace with a fresh battery before
putting into the charger. Best practice is to remove one battery at a time. Please watch our
video on how to change your batteries on your watchband at www.unaliwear.com/support.
The charger has three (3) charge ports so you can have two (2) batteries in the charger at all
times. There will be two (2) fully charged batteries when you are ready to change uncharged
batteries from the watch.
To install your batteries into your Kanega watchband:
1. Press and hold the sides of the batteries.
Electrical
contact pins
Release sides
(squeeze to install or
remove a battery)
