14
3.3.2
Attach the clamps
1
Disassemble the clamps by unscrewing their front two bolts. Use a 4 mm Allen
wrench.
2
Place the two halves of the clamps around the front tubes of the wheelchair’s
frame. In case of 30 mm (1-1/8”) or 35mm (1-3/8”) tube diameter use one layer
of cloth insulating tape to protect wheelchair frame, for other sizes use rubber
spacers.
3
Lightly tighten the clamps by screwing on their two front bolts. You should still be
able to slide the clamp up and down the tube.
4
4
