11
Accessing the Internet
After a connection between your device and the client is set up, you can
access the Internet using the modes listed in the following table.
Mode
Description
Auto
After being powered on, Umniah Router will automatically
connect to the Internet. Once connected, Umniah Router will
not automatically disconnect from the Internet.
Manual
Press and hold
until
turns steady green, which
indicates that you are connected to the Internet.
Log in to the web management page, and then connect to
or disconnect from the Internet as prompted.
On
Demand
After being powered on, if there is data being transferred,
Umniah Router will automatically connect to the Internet. If no
data is transferred within a pre-defined period, Umniah Router
will automatically disconnect from the Internet.
Using the Web Management Page
You can configure and manage Umniah Router settings using the web
management page.
1.
Launch a web browser, and enter
http://192.168.1.1
in the address bar.
2.
Enter the password, and log in to the web management page. The default
password is
admin
.
Note:
To protect your device, only one user can log in to the web
management page at a time.
