background image

6. Install the diffusor using the screws removed 

    in step 1. 

6

3.   There is dust and debris on 

      the solar panel.

3.   Clean dust and debris from 

      solar panel.

 

PROBLEM 

POSSIBLE CAUSE 

CORRECTIVE ACTION 

The light will not come ON. 1.  The battery is low or drained.

 

 

2.

 

The light may be detecting 

daylight or light from another 

source preventing the light 

from coming on.

 

 

1.  Charge the battery fully.

   

 

2.

 

Relocate the light.

 

 

 

The light stay in a low

brightness, the battery 

does not fully charge.

1.   If there is overcast days, the 

      solar panel may not convert 

      enough daylight to recharge 

      the battery sufficiently.

2.   There is no enough sunlight.

1.   Wait for the sunny day.

2.   Reposition solar panel to 

      receive more sunlight.

 

8

 

 

TROUBLESHOOTING

• To prolong the original appearance, clean the light fixture with clear water and a soft, damp cloth only.

• Periodically clean the solar panel with a soft cloth and warm water.  

• Keep the panel clear of snow and leaves.  

• Make sure trees and other objects do not block sunlight from the panel.

• Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature 

  deterioration of the finish.

• This is not a defect in the finish and will not be covered by the warranty.

• Do not spray the light fixture with a hose or power washer.  

CARE AND MAINTENANCE

Содержание 6940101125










Отзывы: