3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• Do not put the battery in fire - it may explode.
• Do not immerse into water.
• Do not expose the light to fire or intense heat as the battery may explode.
• The solar charger board should be set in a sunny area, where maximum sunlight can be collected.
Typically, the solar board should face a direction (south) where sunlight can charge the board for
at least 3 hours per day (5 hours per day if behind glass). It is suggested to charge the light for 24
hours before first use.
WARNING:
PREPARATION
Before beginning to assemble or installing lighting fixture, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble, install or operate the product.
Estimated Assembly Time: 10-20 minutes.
Tools Required for Assembly:
Phillips Screwdriver, Electric Drill, Ladder.
1. Choosing a desired location for the fixture (A),
then mark the position of the drill holes by
using a pencil.
INSTALLATION
1
8.20 ft.
120°
33 ft.
3.15 in.
