5
GETTING STARTED - INITIAL SET UP
TUNING IN
IMPORTANT — Please ensure the TV has
reached room temperature before
connecting the power for the first time
1) Connect the mains lead to your electrical outlet
2) Connect the RF Cable supplied to the
'RF IN
' on the rear of the TV and connect
the other end of the cable to your TV Aerial outlet
3) Install batteries in the remote control and press
the [POWER] button to turn on the TV.
The ‘First Time Installation’ menu should
now appear. If it does not, please press [MENU]
8888 the menu will appear.
4) Press [OK] on the remote control whilst ‘OK’
is highlighted on screen.
Tuning will now take place.
IMPORTANT - WE RECOMMEND YOU CONNECT TV'S WITH BUILT IN DIGITAL/FREEVIEW TO SUITABLE AERIALS. I.E LOFT
AERIAL OR OUTDOOR ROOF AERIAL. ALSO, PLEASE CHECK YOU LIVE IN AN AREA THAT CAN RECIEVE DIGITAL/FREEVIEW
STATIONS. WE DO NOT RECOMMEND USING WITH INDOOR AERIALS UNLESS YOU ARE IN 100% COVERAGE AREA AND ALSO
THAT THE INDOOR AERIAL IS AMPLIFIED/HAS BUILT IN BOOSTER AND IS CAPABLE OF RECIEVING DIGITAL/FREEVIEW. WE
RECIEVE MANY CALLS TO OUR HELPLINE FROM CUSTOMERS ADVISING THEY CANNOT RECIEVE DIGITAL/FREEVIEW
CHANNELS. OFTEN, SIMPLY CONNECTING A 'BOOSTER' BOX IN BETWEEN THE TV AND THE AERIAL SOCKET SOLVES 95%
OF CASES. BOOSTERS/AMPLIFIERS ARE AVAILABLE FOR AROUND £10-£15 FROM MOST RETAILERS
IMPORTANT - AFTER TUNING DO NOT PRESS ANY BUTTONS FOR 20 SECONDS SO THE CHANNEL
INFORMATION CAN BE STORED.
First Time Installation
Country
Language
Please ensure that the aerial is connected to the connector
labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is
highlighted in yellow and press ‘OK’ on your remote .If after
this scan ,not all digital channels are found ,your aerial may
require a signal booster .alternatively ,upgrade your aerial
to a high gain digital version .
OK
Cancel
UK
English
After tuning the program edit screen will appear.
The channels should be in the correct order. However if
you are on the edge of 2 regions that may not be the case.
They can be altered in the following way.
5) Press [>] to select the channel you wish to move
6) Using [\/] and [/\] move to the location you wish
to have the channel
7) Press [>] to confirm the location
The channel has been now moved.
1. BBC 1
2. BBC 2
3. ITV
4. CHAN 4
5. CHAN 5
22_1 english manual 05 new.pdf 5. 5. 2008 10:23:16
