UMC L15/8, Руководство пользователя

Страница: 14 / 28

DVB-T CHANNEL SETTINGS & ELECTRONIC PROGRAM GUIDE (EPG)
System Settings
1) Press [DVB-MENU]
2) Press [\/] 3 times to select System
Settings
3) Press [OK]
First Time Installation/Reinstall
Press [\/] to highlight First Time
Installation, Press [OK]. You will then
be prompted on screen. Press [<] to
highlight Confirm and then press [OK]
System Info
You may be asked by a service engineer
which version of software your TV has.
Press [\/] twice
Press [OK]
Change Pin Code
Press [\/] 3 times
Press [OK]
Enter old pin code
(default is 888888)
Enter new pin code
Enter again
Press [OK] to confirm
Software update
This should be set to auto mode
and should be switched off.
4) After you have finished with this menu
press [DVB-MENU] twice to exit menu
The Electronic Program Guide is
available in DVB-T mode. It is a 7 day
TV guide and provides information
about forthcoming programmes (where
supported by the broadcasted channel).
You can view the start and end time of all
programs and on all channels for the next
7 days.
It is very simple to operate.
1) Press [EPG]. The following will appear
2) Press [CH+] or [CH-] to select channel
you wish to see information about
3) Press [\/] or [/\] to move through
the programs for the day highlighted
4) Press [>] or [<] to move through
the days of the week
In the top right hand corner will appear
information about the program you have
selected
5) Press [DVB-MENU] to exit EPG.
13