Chapter 1
Installing the E100
The instructions in this section explain the procedures for installing
the E100 Card into a SuperMac S900 or J700 series machine. You can
have the card installed by a qualified service provider or you can per-
form the work yourself.
Installing the Card
1.
Turn off your computer, but leave it plugged in to ensure that the
computer is properly grounded.
2.
If you are installing the card in an S900, carefully turn the com-
puter on its right side (as you face the front of the computer).
3.
Loosen the large thumbscrew on the back panel.
Loosen screw
