7
To change the white balance setting before taking a photo:
1. Press the MODE button. The camera will make an audible tone. You will
see the White Balance icon in the settings display change.
2. Press and release the button until the white balance setting you want appears
in the settings display.
Note
: You can also change the camera's white balance on the computer
using the AstraCam 1000 program. See page 14, "Operating the
AstraCam 1000 from the Software."
Erasing Photos
You can erase the most recent photo taken or all the photos with the Erase
button.
To erase the most recent photo:
1. Press the ERASE button. The film counter will begin blinking and the green
action light will turn on.
2. Press the ERASE button again to erase the photo from the camera's memory.
To erase all the photos:
1. Press and hold down the ERASE button for 3 seconds. The film counter will
begin blinking and the action light will turn on.
2. Press the ERASE button again to erase all the photos from the camera's
memory. The film counter returns to "45" or "72" depending the image
mode settings.
Note
: You can also delete photos from your camera using the AstraCam
1000 program. See page 13, "Deleting Photos."
Camera Memory Full
When you run out of shots, a continuous beep sounds and the green light comes
on to signal that camera memory is full. The film counter reads "0." It's time to
download your photos to a computer.
