![background image](http://html2.mh-extra.com/html/umax-technologies/powerlook-1000/powerlook-1000_operation-manual_3560628007.webp)
For APPLE Macintosh (USB equipped) users:
Connecting the USB Cable
1. Plug your USB cable into any open USB connector.
a.
iMac DV: There are two on your keyboard and two located toward the lower rear part
of your monitor, as indicated by the black arrows shown below.
b.
APPLE G3, G4: There are two located on the back panel of your computer.
2. Attach the other end of the USB cable to the USB connector on the back of the scanner.
For APPLE Macintosh (G3, G4, iMac DV or other FireWire equipped) users:
Connecting the FireWire cable
1.
2.
Connect one end of the FireWire cable into the port located on the back panel of the scanner.
Connect the other end of the FireWire cable to one FireWire port of your Mac. IMac DV
FireWire ports are located on the right side of the computer. The FireWire ports on Mac G3,
G4, and G4 Cube are located on the back panel of the computer.
Note: Use only one connection (USB or FireWire but not both.)
7