4
8.ELEMENT AND GASKET FOR EXCHANGE PROCEDURE
The number in a circle indicates parts of DISASSEMBLY DRAWING
(Fig. 2).
1)
Before exchanging Element and Gasket, remove OMT from the pump.
2)
See Fig. 2 and table. 3.
3)
Turn Screw
⑮
counter clockwise with a driver.
4)
Remove Screw and then remove Seal washer
⑫
.
5)
Remove Top cover
①
.
6)
Remove Element
⑪
and then remove Element stopper
③
, Gasket
⑬
from Case
②
.
7)
After exchange Gasket for new one, fix it.
8)
Put Element stopper on Gasket.
9)
After exchanging Element for new one, put Element on Element stopper.
10)
Put Top cover on Element.
11)
After put Screw into Seal washer, fix Case.
12)
Put Screw into the Case.
13)
Do not take it apart except the parts mentioned above.
9.CUSTODY
Put it in a bag (such as a plastic bag). Keep it away from the dust and the direct
sunshine.
