Ulvac DOP-80SP, Инструкция по эксплуатации

Страница: 10 / 26

1
1. Product Outline
1.1 Purpose of Use and Prohibitions
This product is a piston dry pump employing reciprocating motion of cup packing.
Observe the following prohibitions to ensure normal operation of the pump.
Prohibitions
(1) This pump is only for pressure pumping, and must not be vacuumed.
(2) Do not re-sell, repair, or modify this pump without the approval of the manufacturer.
(3) This pump is not designed to be corrosion-proof. Use it only with clean air at normal
temperature, or gases of equivalent characteristics.
(4) Do not attempt to evacuate gases containing particles, dust, water, or corrosive gases.
1.2 Specifications
Table 1.1 Product Specifications
Model DOP-80SP
Discharge
rate
50Hz
80 L/min
60Hz
84 L/min
Pressure (Pressurizing) 0.50 MPaG
Motor 1
φ
, 300W, 4P , capacitor run
Rated
current
50Hz 5.0 A 2.5 A
60Hz 5.5 A 2.7 A
Rated Voltage 100 V 200 V
Speed 1419 / 1714 r/min 1428 / 1718 r/min
Weight 9 kg
Inlet and outlet piping D.O.
φ
9
×
I.D.
φ
5 (R1/4)
Air temperature 7
～
40
℃
Dimensions 168.5(W)
×
288(L)
×
181(H)
1.3 Thermal Protection Relay
1) This pump is fitted with an automatic reset thermal protection relay for overload protection.
This device shuts off the motor power supply circuit automatically to prevent burn-out if the
motor temperature rises due to overloading, or there is a pump fault which prevents rotation.
2) Always fit other protective devices (eg earth leakage breaker, motor breaker) in addition to
the overload protection relay.
See Warning (8), P04
See Caution (5), P05
!
Warning
!
Caution
!
Warning
!
Note