PREFACE
This manual has been prepared to provide you with the information as an introduction to the machine
specifications and operation and also required information for maintenance and trouble-free continuous
operation. Manual also covers the instructions related to erecting in place, making service ready,
operation and periodical maintenance of the machine, as well as general safety instructions.
We don’t recommend you to do any repair or modification unless otherwise stated to do so. All the
disassembly operations of the machine must be handled by the authorized and qualified technical
personnel.
Accurate and systematic operation depends on not only on strictly obeying the maintenance
instructions but also understanding the reason-why behind. Therefore, please keep up with the
maintenance instructions. Uludağ Makina with its technological background and experience is always
at your command for further knowledge wherever required. We hope that you will find your hinge slot
milling machine easy to operate and it will meet your expectations from Uludağ Makina products. We
recommend you to keep this manual under convenient conditions and in an easily accesible place for
prompt use.
Warranty
The machine is under warranty for the period specified in the Warranty Certificate as of the date of
sale invoice. Including/excluding services and parts within the scope of warranty are specified in the
enclosure of the warranty deed. Technical service department in our factory is ready to meet your
demands for every kind relevant to this subject.
Contacts
The following information about the machine needs to be supplied for the written and verbal
communication with the dealer or the manufacturer:
• Machine model
• Machine’s serial no.
• Machine’s supply voltage and frequency
• The name of the dealer where machine was purchased
• Machine’s date of sale
• Description of the defect, if any
• Description of the action
• Daily operation period
1. MACHINE’S DESCRIPTION AND TECHNICAL SPECIFICATIONS
1.1. Machine’s Prescribed Objective of Use
This machine is designed for professional use.
The machine is designed and manufactured
for cutting wood, aluminum and pvc materials and
profiles.
(
It can be used for aluminum, PVC profile and soft-alloy metals with proper cutting tools)
It is used for cutting
wooden material blocks with square and rectangle cross- section.
The use other than the above mentioned cutting operations are not allowed and failures which will
likely happen to machine and the damages to the user and the products will not be included in the
manufacturer’s warranty enclosure.
The machine is not designed for cutting hard-alloy materials like steel, etc.
1.2. Service Life
The service life of the machine is at least 10 years under the conditions of proper use and regular
maintenance.
1.3. Disposal of the Machine
At the end of the service life, the machine can be disposed normally by the collection and recycling
central of industrial waste materials.
1.4. General Safety Instructions
• Your machine must be fixed and secured to a place against unintended and unauthorized access.
