QSx Operating Manual
7
C6054101 (June 2020)
Detailed Operating instructions
When the power is turned on and the bath is full of liquid, the following
screens will display alternately.
When the water temperature is at or above the temperature set, the
message “Temp OK” will display.
The actual temperature in the bath will vary and will be different to the
value shown in the screen above.
To immediately start the cycle using the already set cleaning parameters,
press the
key.
Your QSX remembers the set parameters from the previous cycle. If the
operator wants to run the same cleaning cycle, it is therefore not
necessary to run through the menu each time.
