UTT-901 User Manual
34
3) Click “Delete” to delete the selected account from the drop-down
menu.
4) Click “Modify” to modify the chosen account, need to select account
first, click load again and then click modify, it will be shown at lower part
of page as the following figure, of which:
User name
The modified username;
User level
Modify user authorities;
Password
Modify user password;
Confirm
Make confirmation of the modified user password;
Submit
Click “Submit” to submit the modification .
Owing to the phone's default account: accounts of the administrator level-admin and the ordinary
level
－
guest are all weak account and weak password, the username and password will be easily
to be guessed on public network, so the user had better modify the administrator and ordinary user.
Enter with manager level when making modification
，
create a administrator account and a browse
account
（
you'd better not set the name as admin, administrator, guest, etc.
），
set password and then
save configuration
，
entering with new manager account, delete default manager and browse
account and save configuration
，
security will be enhanced!
Note: If modified password of admin forgotten, please power off the device. And connect the
device LAN port with computer. Computer IP address should be change to 192.168.10.
××
or set as DHCP mode. All configurations can be cleared by “telnet 192.168.10.1” from LAN
port. “Telnet 192.168.10.1” must be done within 5 seconds after power on the device.
