UTT-901 User Manual
16
the user as using outbound proxy automatically. If the
configuration has been disabled, the gateway can still
be registered to the server, but can't make SIP call;
configuration of registered call by the gateway will
not have impacts on SIP point-to-point call.
Auto Detect
Server
Configure automatic detection server of the gateway.
Server Auto Swap Configure main and backup auto-swap server; if the
gateway enables main and backup server function,
the automatic detection and auto-swap functions
should both be chosen.
Note: if you want to register and call through server, you must
configure corresponding numbers
（
which are usually SIP accounts
）
to local port, otherwise the gateway will reject for sending out
register message when it considers that there is no number.
4.5 Advance configuration
4.5.1 Net Service configuration
User can set up Telnet, HTTP, RTP port on this page and view DHCP
table.
After the aforesaid network and VoIP configuration, if the network can
communicate correctly, the user should be able to make VOIP calls
through the register and proxy
.
After submitting the configuration, if the status is still incorrect, click
the menu in the left to renovate. Please do not click the “apply”
continuously, since some ISP may inhibit the gateway to register or
cancel continuously. If users click “apply” continuously, or register
and cancel frequently, the server may stop response, this will make the
gateway can not receive the certifications of register/cancel request
and show error register status!
