Ultrative UTT-850, Руководство пользователя

Страница: 11 / 20

11 -
3.7 Voice memo
It is one greeting voice when incoming a call.. It support user-defined .
Thevoice length is 80 second. About setting ,refer to chapter 4.1
3.8 Reboot system
Reboot the phone ,after rebooting it return to the last store.
3.9 Check the Callers Record
You can check the incoming calls, outgoing calls and missed calls by pressing Callers
4 Voice Record
UTT
-850 phone make more amelioration on voice record than other phone .
4.1 Voice momo
in idle state ,soft key 3 button is for recording. Change the voice momo to user –defined, save
and quit. Handup and press soft key 3 (record) to select voice memo,then record your defined
voice. Remember to save.! User-defined voice momo is 80 seconds.
4.2 Voice record while calling
¾ Press Rec.
¾ Press Stop to stop the record.
Check the voice record
¾ Press Rec. The LCD displays Receive Record
¾ Select Enter
4.3 Listen the voice record
In idle state, press soft key 3 to record page. Follow the LCD showing to use the soft function
key. Process: In leaving message page ,you can find new ,old voice record.
5. Making Call
The chapter will introduce multi-line using ,speed dial, transfer , three way conference
There are three dialing modes:
5.1 Multi-line calling out
UTT
-850 phone support the maximum 5 line calling out. That is to say the phone can
register to 5 different SIP VoIP system synchronously . User can set the memory key from 1 to 5
according to the SIP account for calling out . So user can select the VoIP SP for calling out .
UTT
-850 default calling out use SIP1 service
5.2 Speed dial
In the case that user needn`t to hanup or handfree.In idle state ,just dial the number and
ending with the soft 2 key. If ending with soft 3 key ,it will save the number to
UTT
-850.
5.3 Trnasfer
While in conversation, press soft 2 key,and dial the number that you want to transfer
Note: soft2 key ,in conversation,it is transfer button. In dialing state ,It is mapping