Ultratec SUPERPRINT PRO80, Инструкция по использованию

Страница: 32 / 82

Programming the Relay Voice Announcer Phone Number
1.
Turn on the Superprint Pro80 LVD, the Power light should be lit.
2.
Hold down the key and press .
VOICE NUMBER>
is
displayed.
3.
Type the number that a hearing person can call to reach your local TRS.
4.
Press .
VOICE NUMBER SAVED
is displayed.
SEND MEMO
1.
At any point during a conversation when
it is your turn to type, press
.
SEND MEMO >
is displayed (see
Chapter 5 for more information on Saving
A Memo).
2.
Begin typing the first few letters of the
name of the Memo you want to send.
When you have typed enough letters, the
whole Memo name is displayed.
If you don’t remember what name is used
for the Memo, you can use the
keys to look through the list of Memos.
3.
Press when the name of the
desired Memo is displayed.
The Memo is sent and displayed the same
way it would be if you were typing the
message during the conversation.
4.
Continue the conversation.
Enter
Send Memo
What is a Memo?
A Memo is a short message that you save in the Superprint Pro80 LVD
memory and later send to someone during a conversation. For information
on saving and editing Memos, see Chapter 5 on p. 31.
Enter
Relay Voice Program
2 6 • A D VA N C E D C A L L I N G
SEND MEMO> PIZZA
Send Memo