![Ultratec Minicom IV Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/ultratec/minicom-iv/minicom-iv_user-manual_3549236016.webp)
14 • A D V A N C E D C A L L I N G
Turning off Turbo Code interrupt
+
You can stop the other person from sending interrupts to you by
following the steps below:
1.Press the options key (
+
). You will see PRINT (UP/LOW)
CASE on the display.
2.Press the
key until you see INTERRUPT (ON) on the display.
3.Press the
to change the setting to OFF.
4.Press the
key to save the new setting and leave options.
Turning off interrupt does not affect outgoing interrupts. You can
still send an interrupt to the other person.
Turning Turbo Code on and off
+
+
Turbo Code is used automatically during a call. However, you can
turn Turbo Code off at any time by pressing
+
+
. The
Minicom IV will use Turbo Code again after you turn the power off.
You can also turn off Turbo Code so that the Minicom IV will not
use it until you turn Turbo Code on again. Follow these steps:
1.Hold down the
key and press the
key. You will see PRINT
(UP/LOW) CASE on the display.
2.Press the
key until you see TURBO CODE (ON) on the display.
3.Press the
to change the setting to OFF.
4.Press the
key to save the new setting and leave options or
press the
key to save and go to the next option.
Follow the steps above to turn Turbo Code on again.
Return
Esc
Spacebar
Return
3
Ctrl
B
Shift
Ctrl
B
Shift
Ctrl
Esc
Spacebar
Return
3
Ctrl
3
Ctrl
Содержание Minicom IV
Страница 1: ...305 007002 USING YOUR MINICOM IV...
Страница 29: ...N O T E S 27...