Ultratec Minicom IV, Руководство пользователя

Страница: 10 / 30

8 • S E T – U P
Auto ID starts up when you turn on your Minicom IV and continues
until you begin a conversation. If you are on-line, you will see
SENDING AUTO ID every time the Minicom IV sends out tones.
Auto ID will also begin sending tones whenever no one types for a
few minutes during a conversation. It will continue until someone
starts typing.
Turning off Auto ID +
You can turn off Auto ID at any time by following these steps:
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see AUTO ID (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to save the new setting and leave options or
press the key to save and go to the next option.
Note:
When you turn off Auto ID, it stays off and will not send
tones until you turn it on again. This means that an emergency
service center such as 911 cannot use Auto ID tones to detect
TTY call when Auto ID is off.
Return
Esc
Spacebar
Return
3 Ctrl
3 Ctrl