Ultratec CapTel 800i, Инструкция по эксплуатации

Страница: 78 / 80

76 • F CC I N F O R M AT I O N Customer Service: 888-269-7477
FCC Information
The CapTel has been tested and found to comply with the
specifications for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates and
uses radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
CapTel and
the receiver.
• Connect the CapTel to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. A label is
located on the underside of the
CapTel containing,
among other information, an FCC registration number,
US:D8KMM06BCAPTEL800. If requested, this number
must be provided to the telephone company.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
The REN is used to determine the quantity of devices
which may be connected to the telephone line. Excessive
RENs on the line may result in the devices not ringing in
response to an incoming call. In most, but not all, areas
the sum of RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local
telephone company. The REN for this product is 0.6B.
Should you experience trouble with this telephone
equipment, please contact:
CapTel Customer Service
450 Science Drive
Madison, WI 53711
Phone: 888-269-7477 V/TTY
Email: CapTel@CapTel.com
For repair or warranty information, please contact CapTel
Customer Service at 1-888-269-7477 (V/TTY). If the
equipment is causing harm to the telephone network,
the telephone company may request that you disconnect
the equipment until the problem is resolved.
This equipment cannot be used on public coin phone
service provided by the telephone company. Connection
to party line service is subject to state tariffs.
If the CapTel causes harm to the telephone network,
the telephone company will notify you in advance that
temporary discontinuance of service may be required.
But, if advance notice is not practical, the telephone
company will notify you as soon as possible. Also, you
will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
Occasionally, your telephone company may make changes
in its facilities, equipment, operation, or procedures that
could affect the operation of your equipment. If so, you
will be given advance notice of the change to give you an
opportunity to maintain uninterrupted service.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of the
CapTel does not disable it. If you have questions
about what will disable alarm equipment, consult your
telephone company or a qualified installer.
The CapTel telephone does not have any user- serviceable
parts. Modification or changes to the CapTel not expressly
approved by Ultratec, Inc. can void your authority to
operate the equipment.