Ultrasonic UltraSystem PowerPlus, Руководство по установке

Страница: 8 / 11

7
The Ultra System does not require any maintenance, but it is recommended the control unit is
inspected from time to time.
•
Check the system is on, the LED lights are showing the normal sequence in
operation.
•
Check the ventilation openings (upper and lower) for blockages / obstructions.
•
Check for any risk of water ingress.
MAINTENANCE / ROUTINE CHECKS
When the power is switched on, the system will at first initialise and run through a checking
procedure, this is indicated by the green LED light flashing only. Once this procedure is
completed, normally taking up to 5 seconds, both the green and red LED lights will show.
Note: the LED lights are located at the top of the housing, their meaning as follows:
LED: #1 ‘ON’

: system is on.
Light flashes (every one second) at the beginning of every new programme cycle.
LED: #2 ‘SIG’

: ultrasound signal output.
Light will continuously flash as it runs the sequence.
If at any time the light sequence differs from the above, please refer to the trouble shooting
guide in the manual for explanation. A very slight double-clicking sound will be heard at the
transducer. This is normal and also an indication of its operation.
The ability to hear this
depends on the person’s hearing.
The Ultra System should be in operation continuously for best performance.
THE ULTRASONIC SYSTEM IN OPERATION