3
w
w
w
.ul
tral
u
x.bg
Select the main menu: File (F) => New Project, show as Picture 3.1.2
Picture 3.1.2 New Project
The interface is as Picture 3.1.3 after open new project:
Picture 3.1.3 interface of New Project
In interface of new project, select Controller Type (R800-SDC1 or R808-SDC8), select chip ( the chip
number would be used for the project), select Frame Rate ( 30 or less ), and select wire Sequence of
channel ( RGB or other wire sequence), then click Browse to save the project, and then click “OK” as
shown on Picture 3.1.4.
