Information on disposal of the equipment
The equipment at the end of its useful life must be disposed of at an appropriate recycling center for
waste electrical and electronic equipment. The treatment and disposal of environmentally friendly, helps
prevent potential negative environmental and health and promote the reuse and / or recycling of
materials making up the equipment. Illegal disposal by the user includes the application of administrative
sanctions provided by law.
Our equipment has been manufactured and assembled by the rules and the essential requirements of the RoHS directive, so the
materials we use and electronic subassemblies that we receive from our suppliers have been checked and are produced in
compliance with the Directive in question.
Reference
Title
2004/108/EC
Directive of the European Parliament and of the Council of 15 December 2004 on the
approximation of the laws of the Member States relat ing to electromagnetic compatibility
and repealing Directive 89/336/EEC (EMC)
2006/95/EC
Directive of the European Parliament and the Council of 12 December 2006 on the
approximation of the laws of the Member States relating to electrical equipment designed
for use within certain voltage limits (LVD)
2002/95/EC
Directive of the European Parliament and the Council of 27 January 2003 on the restriction
of certain hazardous substances in electrical and electronic equipment (RoHS)
2002/96/EC & 2003/108/EC
Equipment Directive of the European Parliament and the Council of 27 January 2003 on
waste electrical and electronic equipment (WEEE)
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not
build up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
throughout its life.A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circumstances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing
the light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
.
10.Maintenance and cleaning
DANGER !
Disconnect from the mains before starting any
maintenance work
DIFFUSION
RGBW
10
