Ultrak KC5500CN, Руководство по установке

Страница: 23 / 36

15
3.2 BASIC
INSTALLATION
continued
5.
Install the lens. If a C- or CS-mount lens is used,
adjust the back focal length or picture focus.
•
For C-mount lenses, rotate the focus adjust ring
clockwise.
•
For CS-mount lenses, rotate the focus adjust
ring counterclockwise.
6.
If an auto-iris lens is used, connect the cable of the
lens to the mini-DIN connector supplied with the
camera. Insert the lens connector into the auto-iris
connector on the camera.
7.
Route the assembled cable from the monitor location
to the camera location.
WARNING: Care should be taken when
routing the cable from the monitor to the
camera. Try not to put unnecessary strain
on the cable or connectors. Do not place
the cable next to fluorescent lights as
interference may result. Do not use
staples to support the cable as they may
damage the cable. If the provided camera
cable is not long enough, do not substitute
a telephone cable as it could damage the
camera and/or the monitor. Contact your
authorized Ultrak dealer/ distributor to
purchase longer cables.
8.
Plug the cable into the BNC output port labeled
VIDEO OUT located on the back of the camera.
9.
Plug the other end of the cable into the corresponding
camera input port on the back of the observation
monitor.
Continued on next page